linux中挂载硬盘报错【you must specify the filesystem type】

今天自己的虚拟机磁盘用完成,于是想加一磁盘,当挂载时发现报错you must specify the filesystem type。【注:我的系统环境是lcentos6.3装在virtualbox的虚拟机】

原来是因为该磁盘没有格式分区导致的于是有了以下操作:

1】先查看一下当前的系统情况,新加的盘是sdb

代码如下

[root@test ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sr0 11:0 1 1024M 0 rom
sda 8:0 0 8G 0 disk
├─sda1 8:1 0 500M 0 part /boot
└─sda2 8:2 0 7.5G 0 part
├─VolGroup-lv_root 【dm-0】 253:0 0 6.6G 0 lvm /
└─VolGroup-lv_swap 【dm-1】 253:1 0 992M 0 lvm [SWAP]
sdb 8:16 0 8G 0 disk

2】尝试挂载,报错

代码如下
[root@test ~]# mount /dev/sdb /disk

mount: you must specify the filesystem type

3】格式化该磁盘

代码如下
[root@test ~]# mkfs.ext3 /dev/sdb
mke2fs 1.41.12 【17-May-2010】
/dev/sdb is entire device, not just one partition!
无论如何也要继续? 【y,n】 y
文件系统标签=
操作系统:Linux
块大小=4096 【log=2】
分块大小=4096 【log=2】
Stride=0 blocks, Stripe width=0 blocks
524288 inodes, 2097152 blocks
104857 blocks 【5.00%】 reserved for the super user
第一个数据块=0
Maximum filesystem blocks=2147483648
64 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632

正在写入inode表: 完成
Creating journal 【32768 blocks】: 完成
Writing superblocks and filesystem accounting information: 完成

This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@test ~]#

4】挂载成功

代码如下

[root@test ~]# cd /disk/
[root@test disk]# ls
lost+found

5】增加开机启动

代码如下
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/sdb /disk ext3 defaults 0 0

linux中挂载硬盘报错【you must specify the filesystem type】