I/O、内存、网络性能优化命令 iostat , vmstat,netstat

【I/O、内存、网络性能优化命令 iostat , vmstat,netstat】分享给互联网从爱好者学习参考。

是在sun网站上看到的,原文是e文,连接如下:
http://www.adminschoice.com/docs/iostat_vmstat_netstat.htm
大概翻译了一下,总觉得好像以前哪位大大贴过类似的
不管了,觉得有点用,大家一起看看
翻译得不好,见笑了……如果有错,请指正哦,先谢了
Input Output statistics ( iostat )
iostat反映了终端、磁盘I/O情况和CPU活动。输出结果的第一行是从系统启动到现在为止的这段时间的结果,接下去的每一行是interval时
间段内的结果。Kernel里有一组计数器用来跟踪这些值。
iostat的默认参数是tdc(terminal, disk, and CPU)。如果任何其他的选项被指定,这个默认参数将被完全替代,例如,iostat -d将只反
映磁盘的统计结果。
语法:
基本语法: iostat <options> interval count
option - 让你指定所需信息的设备,像磁盘、cpu或者终端(-d , -c , -t or -tdc ) 。x 选项给出了完整的统计结果(gives the extended
statistic)。
interval - 在两个samples之间的时间(秒)。
count - 就是需要统计几次
例子:
$ iostat -xtc 5 2
extended disk statistics tty cpu
disk r/s w/s Kr/s Kw/s wait actv svc_t %w %b tin tout us sy wt id
sd0 2.6 3.0 20.7 22.7 0.1 0.2 59.2 6 19 0 84 3 85 11 0
sd1 4.2 1.0 33.5 8.0 0.0 0.2 47.2 2 23
sd2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
sd3 10.2 1.6 51.4 12.8 0.1 0.3 31.2 3 31

The fIElds have the following meanings:
disk name of the disk
r/s reads per second
w/s writes per second
Kr/s kilobytes read per second
Kw/s kilobytes written per second
wait average number of transactions waiting for service (Q length)
actv average number of transactions actively
being serviced (removed from the
queue but not yet
completed)
%w percent of time there are transactions waiting
for service (queue non-empty)
%b percent of time the disk is busy (transactions
in progress)


Results and Solutions:
从iostat输出结果中需要注意的值:
Reads/writes per second (r/s , w/s)
Percentage busy (%b)
Service time (svc_t)
如果磁盘显示长时间的高reads/writes,并且磁盘的percentage busy (%b)也远大于5%,同时average service time (svc_t)也远大于30
milliseconds,这以下的措施需要被执行:
1.)调整应用,令其使用磁盘i/o更加有效率,可以通过修改磁盘队列、使用应用服务器的cache
2.)将文件系统分布到2个或多个磁盘上,并使用volume manager/disksuite的条带化特点
3.) 增加系统参数值,如inode cache , ufs_ninode。Increase the system parameter values for inode cache , ufs_ninode , which
is Number of inodes to be held in memory. Inodes are cached globally (for UFS), not on a per-file system basis
4.) 将文件系统移到更快的磁盘/控制器,或者用更好的设备来代替
还有两段等会翻好了再贴……
Virtual Memory Statistics ( vmstat )
vmstat - vmstat反映了进程的虚拟内存、虚拟内存、磁盘、trap(是不是翻译成中断??)和cpu的活动情况
在多cpu系统中,vmstat在输出结果中平均了cpu数量。For per-process statistics .如果没有选项,vmstat显示一行虚拟内存活动的概要
结果,是从系统启动时开始的。
语法:
vmstat <options> interval count
option - 让你指定所需的信息类型,例如 paging -p , cache -c ,.interrupt -i etc.
如果没有指定选项,将会显示进程、内存、页、磁盘、中断和cpu信息
interval - 同iostat
count - 同iostat
例子
The following command displays a summary of what the system
is doing every five seconds.
example% vmstat 5
procs memory page disk faults cpu
r b w swap free re mf pi p fr de sr s0 s1 s2 s3 in sy cs us sy id
0 0 0 11456 4120 1 41 19 1 3 0 2 0 4 0 0 48 112 130 4 14 82
0 0 1 10132 4280 0 4 44 0 0 0 0 0 23 0 0 211 230 144 3 35 62
0 0 1 10132 4616 0 0 20 0 0 0 0 0 19 0 0 150 172 146 3 33 64
0 0 1 10132 5292 0 0 9 0 0 0 0 0 21 0 0 165 105 130 1 21 78


The fields of vmstat"s display are
procs
r in run queue
b blocked for resources I/O, paging etc.
w swapped
memory (in Kbytes)
swap - amount of swap space currently available
free - size of the free list
page ( in units per second).
re page reclaims - see -S option for how this field is modified.
mf minor faults - see -S option for how this field is modified.
pi kilobytes paged in
po kilobytes paged out
fr kilobytes freed
de anticipated short-term memory shortfall (Kbytes)
sr pages scanned by clock algorithm
disk ( operations per second )
There are slots for up to four disks, labeled with a single letter and number.
The letter indicates the type of disk (s = SCSI, i = IPI, etc) . The number is
the logical unit number.
faults
in (non clock) device interrupts
sy system calls
cs CPU context switches
cpu - breakdown of percentage usage of CPU time. On multiprocessors this is an a
verage across all processors.
us user time
sy system time
id idle time
结果和解决方案:
A. CPU issues:
下面几列需要被察看,以确定cpu是否有问题
Processes in the run queue (procs r)
User time (cpu us)
System time (cpu sy)
Idle time (cpu id)
procs cpu
r b w us sy id
0 0 0 4 14 82
0 0 1 3 35 62
0 0 1 3 33 64
0 0 1 1 21 78

问题情况:
1.) 如果processes in run queue (procs r)的数量远大于系统中cpu的数量,将会使系统便慢。
2.) 如果这个数量是cpu的4倍的话,说明系统正面临cpu能力短缺,这将使系统运行速度大幅度降低
3.) 如果cpu的idle时间经常为0的话,或者系统占用时间(cpu sy)是用户占用时间(cpu us)两辈的话,系统面临缺少cpu资源
解决方案 :
解决这些情况,涉及到调整应用程序,使其能更有效的使用cpu,同时增加cpu的能力或数量。
B. Memory Issues:
内存的瓶颈取决于scan rate (sr) 。scan rate是每秒时钟对页的扫描 (he scan rate is the pages scanned by the clock algorithm per
second.)如果 scan rate (sr)一直大于200 pages每秒,这时就是内存短缺的现实。
解决方案 :
1. 调整应用和服务器,使其能更好的使用memory和cache
2. 增加系统内存
3. Implement priority paging in s in pre Solaris 8 versions by adding line "set priority paging=1" in
/etc/system. Remove this line if upgrading from Solaris 7 to 8 & retaining old /etc/system file.
Network Statistics (netstat)
netstat通过选项来显示不通的网络相关的数据结构(netstat displays the contents of various network-related data structures
in depending on the options selected.)
语法 :
netstat <option/s>
多个选项可以同时使用
Options
-a - displays the state of all sockets.
-r - shows the system routing tables
-i - gives statistics on a per-interface basis.
-m - displays information from the network memory buffers. On Solaris, this shows statistics
forSTREAMS
-p [proto] - retrieves statistics for the specified protocol
-s - shows per-protocol statistics. (some implementations allow -ss to remove fileds with a value of 0 (zero) from the
display.)
-D - display the status of DHCP configured interfaces.
-n do not lookup hostnames, display only IP addresses.
-d (with -i) displays dropped packets per interface.
-I [interface] retrieve information about only the specified interface.
-v be verbose
interval - number for continuous display of statictics.
Example :
$netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ------ ---------
192.168.1.0 192.168.1.11 U 1 1444 le0
224.0.0.0 192.168.1.11 U 1 0 le0
default 192.168.1.1 UG 1 68276
127.0.0.1 127.0.0.1 UH 1 10497 lo0
这个显示了一台solaris机器的ip为192.168.1.11,他的默认网关192.168.1.1
结果和解决方案:
A.)网络连通
上面的命令经常用来检查网络的连通性。特别是当机器无法访问外部网络时:
1. 默认路由ip是否正确
2. 能否ping通网关
3. 如果网关地址不对,可以使用route add命令,参考 man route
route command examples:
$route add default <hostname>
$route add 192.0.2.32 <gateway_name>
If the router address is correct but still you can"t ping it there may be some network cable /hub/switch problem and you
have to try and eliminate the faulty component .

B.) 网络反映
$ netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 77814 0 77814 0 0 0
hme0 1500 server1 server1 10658566 3 4832511 0 279257 0
这个选项用于诊断网络问题,网络连通但连接速度慢
Values to look at:
Collisions (Collis)
Output packets (Opkts)
Input errors (Ierrs)
Input packets (Ipkts)
The above values will give information to workout
i. Network collision rate(网络冲突率)如下 :
Network collision rate = Output collision counts / Output packets
网络冲突率大于10%就显示,网络负载过大、网络配置不正确、硬件问题
ii. Input packet error rate(进入包错误率)如下 :
Input Packet Error Rate = Ierrs / Ipkts.
如果input error rate高(ver 0.25 percent),这个主机就正在丢包。hub/switch 连线就需要被检查是否存在潜在的问题。
C. Network socket & TCP Cconnection state
netstat给出了关于网络socket和tcp state的重要信息。只是非常有用的,在寻找开放、关闭和等待网络tcp连接。
netstat返回如下的网络状态 :
CLOSED ---- Closed. The socket is not being used.
LISTEN ---- Listening for incoming connections.
SYN_SENT ---- Actively trying to establish connection.
SYN_RECEIVED ---- Initial synchronization of the connection under way.
ESTABLISHED ---- Connection has been established.
CLOSE_WAIT ---- Remote shut down; waiting for the socket to close.
FIN_WAIT_1 ---- Socket closed; shutting down connection.
CLOSING ---- Closed, then remote shutdown; awaiting acknowledgement.
LAST_ACK ---- Remote shut down, then closed ;awaiting acknowledgement.
FIN_WAIT_2 ---- Socket closed; waiting for shutdown from remote.
TIME_WAIT ---- Wait after close for remote shutdown retransmission.

Example:
#netstat -a

Local Address Remote Address Swind Send-Q Rwind Recv-Q State
*.* *.* 0 0 24576 0 IDLE
*.22 *.* 0 0 24576 0 LISTEN
*.22 *.* 0 0 24576 0 LISTEN
*.* *.* 0 0 24576 0 IDLE
*.32771 *.* 0 0 24576 0 LISTEN
*.4045 *.* 0 0 24576 0 LISTEN
*.25 *.* 0 0 24576 0 LISTEN
*.5987 *.* 0 0 24576 0 LISTEN
*.898 *.* 0 0 24576 0 LISTEN
*.32772 *.* 0 0 24576 0 LISTEN
*.32775 *.* 0 0 24576 0 LISTEN
*.32776 *.* 0 0 24576 0 LISTEN
*.* *.* 0 0 24576 0 IDLE
192.168.1.184.22 192.168.1.186.50457 41992 0 24616 0 ESTABLISHED
192.168.1.184.22 192.168.1.186.56806 38912 0 24616 0 ESTABLISHED
192.168.1.184.22 192.168.1.183.58672 18048 0 24616 0 ESTABLISHED

if you see a lots of connections in FIN_WAIT state tcp/ip parameters have to be tuned because the
connections are not being closed and they gets accumulating . After some time system may run out of
resource . TCP parameter can be tuned to define a time out so that connections can be released and
used by new connection.
A detailed document about tuning tcp/ip can be found at
http://www.sean.de/Solaris/soltune.html

I/O、内存、网络性能优化命令 iostat , vmstat,netstat